Price range: $5,316.00 through $12,575.00
The Caledon Battery Charger is a DC charger that has an HMI module. The HMI module provides real-time operational status screens and alarm condition screens. This unit is ideal for utility power, telecommunications, UPS systems, and other stationary battery applications. The extra charge current allows for additional larger batteries to be added to the UPS system for extended battery runtimes.
Maximize the life of your batteries by using the innovative Caledon Battery Charger for voltage regulation, current limiting, and temperature compensation. Good management of lead-acid batteries and correct charging greatly improves battery performance. The setup of the operational parameters and alarm limits is facilitated through the HMI module.
DC power systems take continuous AC voltage in and provide controlled variable DC voltage out. The Caledon Battery Charger DC output range is from nominal 48VDC to 288VDC at 25A or 60A. A 15 foot DC Output cable and a temperature sensor probe assembly is supplied with each charger.
* Caledon Charger is shown on Battery Cabinet BC39
Description
The Caledon Battery Charger is a DC charger that has an HMI module. The HMI module provides real-time operational status screens and alarm condition screens. This unit is ideal for utility power, telecommunications, UPS systems, and other stationary battery applications. The extra charge current extends the battery runtime during prolonged power outages.
Maximize the life of your batteries by using the innovative Caledon Battery Charger for voltage regulation, current limiting, and temperature compensation. Good management of lead-acid batteries and correct charging greatly improves battery performance. The setup of the operational parameters and alarm limits is facilitated through the HMI module.
DC power systems take continuous AC voltage in and provide controlled variable DC voltage out. The Caledon Battery Charger DC output range is from nominal 48VDC to 288VDC at 25A or 60A. A 15 foot DC Output cable and a temperature sensor probe assembly is supplied with each charger.
This high voltage DC charger can be configured to either mount into a 23” wide relay rack or on the top surface of a battery cabinet. Mounting must be located in proximity to the battery cabinet whose batteries are to be charged.
All C&C Power products are factory tested to some of the highest standards in the industry. Please contact our support team with questions on installation, service, and preventative maintenance.
LEAD TIME
2-7 Weeks ARO
Color: Black
Operating Temperature: 0° C to 40° C (32° F to 104° F)
Wire Size and Type: Per National Electrical Code (ANSI/NFPA) and Canadian Electrical Code and/or all applicable national and local codes.
120/208V 1Ph Hardwire Input
| Charger Output Voltage DC |
Input AC Voltage Single Phase |
Output Current Max |
Float Voltage 2.25 / cell |
Min Output Voltage |
Max Output Voltage |
| 48 | 100 – 120 200 – 277 |
27A 60A |
54V | 42V | 58V |
| 72 | 100 – 120 200 – 240 |
24A 57A |
81V | 46V | 130V |
| 120 | 100 – 120 200 – 240 |
24A 57A |
135V | 69V | 195V |
| 144 | 100 – 120 200 – 277 |
27A 60A |
162V | 126V | 174V |
| 192 | 100 – 120 200 – 277 |
27A 60A |
216V | 168V | 232V |
| 240 | 100 – 120 200 – 277 |
27A 60A |
270V | 210V | 290V |
| 288 | 100 – 120 200 – 277 |
27A 60A |
324V | 252V | 348V |
Key Features
- Rack mount or battery cabinet top surface mount
- PID (Proportional Integral Derivative) controller
- Alarm Relay Contacts
- Emergency Power Off (EPO)
- TCP/IP Network connection
- Webpage presents status information
- Modbus TCP/IP
- Simple Network Management Protocol (SNMP) version V1, V2c and V3
- Simple Mail Transfer Protocol (SMTP)
- Graphical User Interface (GUI)
- Temperature compensation charger voltage prolongs battery life
- Powder coated steel construction
- Factory assembled and fully tested
Additional information
| Weight | 43 lbs |
|---|---|
| Dimensions | 23.1 × 21.6 × 4.5 in |
| Voltage |
120V, 144V, 192V, 240V, 288V, 48V, 72V |
| Color |
Black |