Wall Mount UPS Battery Disconnect

A C&C Power Wall Mount UPS Battery Disconnect isolates the battery string for added safety and ease of maintenance. C&C Power’s 91830, 91822, and 91810 Series Disconnects offer a full line of circuit breakers ranging from 30 to 1200 amps. A datasheet and sales drawing sheets for each can be found in the Specifications tab at the bottom of this page.

Each Wall Mount UPS Battery Disconnect is available with your choice of breaker accessories including aux contacts, bell alarm contacts, shunt trip and under voltage trip. C&C Power’s battery disconnects are listed to UL 1778 and are CSA certified. 

Circuit Breaker Accessory Options: 

Auxiliary switch: An auxiliary switch is for applications requiring remote on or off indication. Each auxiliary switch is comprised of an open, closed, and common contact.

Bell alarm: The bell alarm switch is closed when the circuit breaker has been tripped. This can be due to a short circuit, shunt trip, or under-voltage trip. The bell alarm switch is automatically opened when the circuit breaker is reset. 

Shunt trip: Circuit breakers may be tripped from a remote location with the use of a shunt trip. Shunt trips can be activated by applying a specified voltage through the shunt trip contacts. This automatically causes the circuit breaker to trip. 

Under-voltage (UV) trip: The UV trip monitors a voltage across a set of contacts. If the voltage drops to a value below 35% of the specified coil rating, the under-voltage trip device trips the circuit breaker. The operation is instantaneous and the circuit breaker cannot be reset until the voltage returns to at least 85% of the specified coil voltage. 

Contact our support team with questions on installation, service, and preventative maintenance on any Battery Cabinet system.