Batt-Safe II, Battery Monitoring System
Recently featured in Consulting-Specifying Engineer Magazine for Innovations From The Industry, Batt-Safe II is the only battery monitor certified by UL for detection and prevention of thermal runaway.
Prevent Outages & Maximize Your Uptime: Organizations face a loss in capital and difficult challenges arise when data center outages occur. These critical systems remain in operation due to the Uninterruptible Power Supply (UPS). But the batteries that support the UPS are the most important component in reliability.
The use of the Batt-Safe II battery monitoring system drastically reduces the rate of critical outages. It increases preventive tactics, allowing the onsite operation to become alarmed, due to a poor performing battery or batteries. Compared to preventative maintenance alone, the Batt-Safe II dramatically rises the Mean Time Between Failure (MTBF) and is the only battery monitoring system certified by UL for detection and prevention of thermal runaway.
- Single AC Input and network drop, for an easy, less costly installation
- Automatic emailing of event and system logs
- Improved IFC thermal runaway algorithm
- Graphic display of cabinet’s status
Features & Benefits: The Batt-Safe II helps you make efficient, informed decisions when addressing battery-related issues. It allows all the critical information to be seen in real-time, helping you make the appropriate, corrective action with confidence.
Security & Reliability: The system contains the latest and most secure Simple Network Management Protocol version 3 (SNMP3). C&C Power is one of the only companies that contain this high level of security.
Regulatory Compliance: This system allows users to comply with the International Fire Code (IFC), California Fire Code (CFC), and NFPA. These are the most up-to-date codes that mandate thermal runaway protection.
Reduce Maintenance & Replacement Costs: Battery maintenance and replacement are based on the condition of the batteries, not arbitrary time schedules, which allows the user to spend capital, only when necessary.
Ease of Installation: Batt-Safe II is easy to install and simple to operate a battery monitoring system that can be used on all battery types. The battery monitor can daisy chain up to 12 units, which is an extremely unique characteristic for this type of device.