Description
The CSB HRL12390W Battery is specially designed for high efficient discharge and long-life applications. Its characteristics are small volume, lightweight, and high discharge efficiency. This maintenance-free sealed lead acid battery had an (AGM) Absorbent Glass Mat technology for efficient gas recombination of up to 99%. It can be used for more than 260 cycles at 100% discharge in cycle service and up to 10 years in standby service.
The HRL in the CSB HRL12390W Battery stands for High Rate and long life. When it is used in safe surroundings, the battery is maintenance-free, adding water is unnecessary and it can be recharged repeatedly. With an isolated seal, it can be placed horizontally, vertically, or sideways. Safety and function will not be affected by placement direction. It has low resistance so recharge is easy and energy output is more remarkable.
Find more product information on the CSB HRL12390W Data Sheet. Contact our support team with questions on installation, service, and preventative maintenance on any UPS battery replacement or battery cabinet system.
Nominal Voltage: 12V (6 cells per unit)
Nominal Capacity: 410W @15min-rate to 1.67V per cell @25℃ (77℉)
Weight: Approx. 33.00 Kg (72.73 lbs)
Maximum Discharge Current: 800A (5sec)
Internal Resistance: Approx. 3.00 mΩ
Short Circuit Current: 2779A
Maximum Charge Current: 39.0A
Terminal Types: I2 thread lead alloy terminal to accept M6 bolt
Terminal Breaking Torque: 138.6 Kgf·cm / 120.3 Lbf·in / 13.58 N·m
Container Material: Flame Retardant Polypropylene (UL 94-V0)
Dimensions:
Length (L) 343.0±2.5 mm 13.50±0.10 inch
Width (W) 170.0±2.0 mm 6.69±0.08 inch
Container Height (h) 213.9±2.5 mm 8.42±0.10 inch
Overall Height (H) 216.9±2.5 mm 8.54±0.10 inch
