| |
C&C Power manufactures a full line of factory assembled battery cabinets available in a wide range of sizes and colors to meet your specific needs. All factory assembled cabinets are ETL, CSA and UL 1778 listed. |
|
|
| |
 |
| |
| The C&C Power Advantage |
|
- All battery cabinet assemblies are listed to UL 1778.
- The BC2, BC7, BC11, BC14 and BC25 battery cabinets are provided with heavy duty casters and are shipped on skids with hinged attached ramps for easy unloading.
- The BC25, BC39, BC43, BC55, UBC40, UBC64, UBC75 and UBC77 battery cabinets are provided with locking hinged front doors for secure and easy access.
- Turn around time for deliveries are typically two weeks or less after receipt of order.
- C&C Power has thousands of batteries in stock to facilitate quick deliveries.
|
| Electrical: |
- C&C Power is the only manufacturer using special fast acting fuses for critical short circuit protection to prevent battery explosions.
- All circuit breakers used on 480 VDC nominal voltage cabinets are rated to 600 VDC.
- All cables are UL listed, high flex THHW type to reduce stress on battery connections.
|
| Construction: |
- All cabinets are of welded construction and formed from heavy gauge steel with added supports to retain cabinet squareness and integrity during harsh shipping and handling conditions.
- All cabinets are Zone 4 approved and are equipped with the required mounting brackets and installation drawings.
- Seismic Certified cabinets are available on select C&C Power battery cabinets. Seismic Certified cabinets are certified to the 2007 edition of the California Building Code (CBC 2007) and 2006 edition of the International Building Code (IBC 2006) to meet IBC Seismic Design Category E (Ss=2.0) and Importance Factor 1.5.
- All cabinet panels, brackets, gussets and supports are fabricated with locators and notches to precisely fixture cabinet assemblies into place during the welding process to insure quality.
- Adjustable battery rails or trays are provided to allow for multiple battery configurations and facilitate battery upgrades in the future.
- Steel parts are sent through a five stage iron-phosphate wash system to clean and pre-treat the metal prior to powder coating.
- Cabinets are top coated with a hybrid epoxy-polyester powder coat and oven cured for a chip and corrosion resistant long lasting finish.
|
| Assembly: |
- Heavy duty polyester strapping material is used to tie down batteries.
- Protective rubber is placed under batteries to prevent damage to cases during shipment.
- Cabling is routed down the sides of the cabinet, away from the front of the batteries allowing full access for easy maintenance.
- Easy to follow series wiring is routed efficiently and neatly with tier to tier jumpers located at front batteries allowing for safe and easy maintenance.
- Thorough quality control procedures include Hi-Pot testing to 2,800 volts to detect for possible shorts and any suspect or leaking batteries.
|
|
|
| |
|
 |
C&C Power manufactures a full line of factory assembled battery cabinets available in different options to meet specific codes and requirements that you may need. Click here for more information!
|
|
| |
| |
|
| |
BR62 Battery Rack |
The BR62 Battery Rack can hold up to forty 170 AH front access batteries. The BR62 is constructed of welded heavy gauge steel and is available in multiple colors of durable and corrosion resistant powder coat finish. All factory assembled cabinets are ETL, CSA and UL 1778 listed. BR62 Battery Rack info >>
|
 |
 |
|
|
|
|
| |
| |
|
| |
|
| |
BC39 Battery Cabinet |
The BC39 battery cabinet can hold up to thirty-two 620 watt or sixty 200 watt batteries. This NEMA 1 rated battery cabinet is constructed of welded heavy gauge and is available in multiple colors of durable and corrosion resistant powder coat finish. All factory assembled cabinets are ETL, CSA and UL 1778 listed. BC39 Battery Cabinet info >>
|
|
 |
|
|
|
BC25 Battery Cabinet |
The BC25 battery cabinet can hold up to thirty 400 watt or forty 200 watt batteries. This NEMA 1 rated battery cabinet is constructed of welded heavy gauge and is available in multiple colors of durable and corrosion resistant powder coat finish. All factory assembled cabinets are ETL, CSA and UL 1778 listed. BC25 Battery Cabinet info >>
|
|
 |
|
|
|
| |
BC14 Battery Cabinet |
This NEMA 1 rated battery cabinet is constructed of welded heavy gauge steel and is available in multiple colors of durable and corrosion resistant powder coat finish. All factory assembled cabinets are ETL, CSA and UL 1778 listed. BC14 Battery Cabinet info >>
|
|
 |
|
|
|
BC11 Battery Cabinet |
This NEMA 1 rated battery cabinet is constructed of welded heavy gauge steel and is available in multiple colors of durable and corrosion resistant powder coat finish. All factory assembled cabinets are ETL, CSA and UL 1778 listed. BC11 Battery Cabinet info >>
|
|
 |
|
|
|
| |
BC7 Battery Cabinet |
This NEMA 1 rated battery cabinet is constructed of welded heavy gauge steel and is available in multiple colors of durable and corrosion resistant powder coat finish. All factory assembled cabinets are ETL, CSA and UL 1778 listed. BC7 Battery Cabinet info >>
|
|
 |
|
|
|
BC2 Battery Cabinet |
This NEMA 1 rated battery cabinet is constructed of welded heavy gauge steel and is available in multiple colors of durable and corrosion resistant powder coat finish. All factory assembled cabinets are ETL, CSA and UL 1778 listed. BC2 Battery Cabinet info >>
|
|
 |
|
|
|
|
| |
| |
|
| |
BR1 Rack Mount Battery Cabinet |
The BR1 Rack Mount Battery Cabinet provides backup power in the smallest possible package. The BR1 uses only 2RU of space in a 19" or 23" rack. The Reserve Power Unit can be installed in parallel to achieve higher amp hour capacities. BR1 Rack Mount Battery Cabinet info >> |
|
 |
|
|
|
BR8 Rack Mount Battery Cabinet |
This BR8 Rack Mount Battery Cabinet provides up to 32 batteries with a capacity of up to 47A at a 15 min-rate. The batteries are conveniently housed in an 8RU rack mount and are secured with heavy duty restraining brackets. BR8 Rack Mount info >> |
|
 |
|
|
|
| |
| |
|
| |
BC14 Spares Battery Cabinet |
This NEMA 1 rated battery cabinet is constructed of welded heavy gauge steel and is available in multiple colors of durable and corrosion resistant powder coat finish. The cabinet has a 12 volt charger that is wired to batteries with pluggable connectors. BC14 Spares Battery Cabinet info >> |
|
 |
|
|
|
|
|
|
|
| |
| |
|
| |
Landing Box |
C&C Power's Landing Boxes provide a convenient means for parralleling mulitple battery cabinets. Landing boxes are provided with landings for two hole compression lugs for battery positive, battery negative, and ground. A circuit breaker accessory terminal block is also provided. Landing boxes are available for use with C&C Power's BC55, UBC64, and UBC75 battery cabinets. Landing Box info >>
| |
 |
|
|
|
Landing Cabinet |
C&C Power's Landing Cabinets provide a convenient means for parralleling mulitple battery cabinets. Landing cabinets are provided with landings for two hole compression lugs for battery positive, battery negative, and ground. A circuit breaker accessory terminal block is also provided. Landing Cabinet info >>
| |
 |
|
|
|
